JBL Professional AWC129 All-Weather 12″ 2-Way 400W Passive Coaxial Loudspeaker (Single, Black)

Description The black JBL AWC129 is a single all-weather passive coaxial loudspeaker designed for high-output, full-range sound reinforcement in various indoor and outdoor applications such as sports facilities, stadiums, fairgrounds, cruise ships, and background music/paging systems.Capable of up to 400W long-term power handling, it incorporates a 12″ Kevlar-reinforced woofer and a 1″ fluid-cooled high-frequency driver to produce a high maximum peak SPL of 128 dB and a wide frequency response of 55 Hz to 20 kHz (-10 dB). The coaxial speaker configuration yields a 90 by 90° dispersion pattern for consistent coverage.The paintable ABS enclosure boasts an IP56 rating for effective weather resistance and a sturdy steel grille backed with open-cell foam for additional protection. An integrated multi-tap transformer—configurable via a rear-panel tap selector—allows operation in 70/100V systems or 8-ohm low-impedance setups. A color-matched U-bracket is included for ease of installation. FeaturesHighly weather-resistant IP56 ratingCoaxial speaker design with 12″ Kevlar-reinforced woofer and 1″ fluid-cooled high-frequency compression driver400W power handling (average continuous pink noise) with high sensitivity provides high SPL capabilityConsistent 90 x 90° broadband pattern controlHigh-slope passive crossover network for constant coverage and natural midrangeMinimum audibility SonicGuard high-frequency overload protection55 Hz to 20 kHz frequency range (-10 dB), 80 Hz to 20 kHz frequency response (±3 dB)Built-in 200W 70/100V multi-tap transformer or direct 8-ohm low-impedance transformer bypassPaintable enclosure is constructed of thick ABS and fiberglass and is heavily braced to maximize low-frequency performanceHeavy-duty, weather-capable U-type mounting bracket is includedSpecificationsPower Rating1500 Watts PeakLF: Dual-Bridged Technology™, Class DFrequency Range31 Hz – 220 HzDimensions (H x W x D)508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)Frequency Range (-10dB)31 Hz – 220 HzMaximum Peak Output126 dB SPL at 1mBandpass Nominal ImpedanceLF: 2 x 2 ohmsLF Driver1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnetInputsXLR with loop throughUser ControlsInput Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.System ProcessingDSP based, resident in Input ModuleSystem ManagementDSP based limiters for mechanical and thermal protectionAC Power Operating Range90-132 VAC or 216-264 VAC, 50/60HzAC Line VoltageUser selectable: 120V/240V (-15%, 10%)AC Input ConnectorNeutrik PowerCon (NAC 3MPA)AC Loop Through ConnectorNeutrik PowerCon (NAC 3MPB)AC Current Requirements6A per system at 120V, 3A per system at 240VEnclosure18 mm birch plywood.Suspension / MountingOptional VRX-AF line-array frame kit or 10 mm forged eyeboltsFinishBlack DuraFlex™ finishGrillePowder coated, black, 16-gauge perforated steel with acoustically transparent foamNet Weight (each)38.5 kg (85 lb)Optional AccessoriesVRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kitOutputs1 x XLRNominal ImpedanceLF: 2 x 2 ohms